This project was done with help from Mr D, I needed no real help with it but motivation was well needed and he chugged me along with some ideas for it and to execute the build.
We set out to build a crate shadow box
We used 9 inch wide pine board cut to 4 inches wide for 2 sides and the back 9 inches x 12, and 1x2x12 inch pine slates for the other 2 sides, 3 each side ,and a piece of plexi glass to fit the front (measure after it’s built)
We stained and painted the wood to look like reclaimed chippy white boards.
YOU CAN SEE THE TECHNIQUE I USE HERE
After filling it with thrifted teal ornaments, Mr D did the cutting down of the plexi glass for me to fit on the front, and used 4 small screws to attach it on the corners.(pre drilling the holes in the plexi glass is a must)
SHARED AT THESE LINK PARTIES